Installation And Connection - Bartscher Piccolino A120787 Mode D'emploi


Do not use the device in case it does not function properly, has been damaged or
dropped.

Do not use any accessory or spare parts that have not been recommended by the
manufacturer. These can be dangerous for the user or lead to damages of the
device or personal injury, and further, the warranty expires.

Do not move or tilt the device when in operation.
WARNING! Hazard via electrical current!
The device can cause injuries due to improper installation!
Before installation the local power grid specification should be compared with
that of the device (see type label).
Connect the device only in case of compliance!
Take note of the security advice!

5.2 Installation and connection


Unpack the device and remove all packing material.

Put the device in a safe place that can support its weight and is heat-resistant.

Never place the device on a flammable surface.

Do not operate the device near an open flame, electric oven, heater or other source
of heat.

Do not place the device near walls or other flammable materials. Maintain a minimum
distance of 10 cm from all sides.

Never block the ventilation ducts.

Never cover the device while in use, nor place any objects on it.

The socket's circuit must be secured to a minimum of 16A. Only connect the
device directly to a wall socket; do not use extension cords or power strips.

The device should be placed to provide quick access in case it becomes necessary
to disconnect it.
- 23 -