Klarstein 10030503 Mode D'emploi page 11

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

How to use the Controls
1. Safely place the appliance on a flat and level surface. Stack the trays one on top of the other, then insert plug
in electrical outlet. Note: When the dehydrator is plugged in to an electrical outlet, the display will show/
flash (70°C and 12:00 hours) by default.
2. To adjust the "Temperature", rotate the "TEMP" knob to set the desired temperature range from 40°C to
70°C to increase or decrease the temperature by one degree.
3. To adjust the "Time", rotate the "TIME" knob to set the desired time range from 1 hour to 48 hours. To set
the hours, the time by one hour.
4. To turn the dehydrator on, press the <ON/OFF> button to begin the programmed cycle. You will also hear
the fan operating.
5. The model will stop automatically when the time expires or you can stop it at anytime using the <ON/OFF>
button. Remove the plug from the outlet once it has stopped.
6. Usually the base layer near fan will dry fast than the top layer, so in order to make the foods dry well-
distributed and fast, you can adjust the base layer to top position after it dry well, then put the top layer to
base position it will make fast and nicer.
Recommended Drying Temperatures
Herbs 40 °C
Greens 45-50 °C
Bread 40-50 °C
Yoghurt 45-°C
Vegetables 50-55 °C
Fruits 50-60 °C
Meat, Fish 65-70 °C
11

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

10030504

Table des Matières