Ducted - 3 1/4" X 10" Rectangular Outlet On Top - Faber LEVANTE 1 LEVN24SS300 Instructions D'installation

DUCTED - 3 1/4" X 10" RECTANGULAR OUTLET
ON TOP
Choose the rectangular upper air outlet or rectangular rear air outlet and cut where
1
indicated.(See page 18 for Rear Outlet)
2 Install the included rectangular air outlet with two screws
Connect the metal ductwork to the Roof or Wall Cap purchased separately and
3
then attach ductwork.
F
Torx Screws (1/8" x 3/8")
Torx Screwdriver
Top
Rear
Top
3 " x 10"
1/4
Caution: If an elbow is required,
do it as far away from the
hood's exhaust opening as
possible.
.
F
17