Faber LEVANTE 1 LEVN24SS300 Instructions D'installation page 16

Install the Flange with Flange transition screws
2
NOTE: The Flange must be mounted with the lip facing upward.
Only use the screws provided for the flange
F
Torx Screws (1/8" x 3/8")
Torx Screwdriver
Install 7" Round Damper purchased separately. Secure damper with foil duct tape.
3
Connect the 7" Round Metal Ductwork to the Roof or Wall Cap purchased separately
4
and then attach ductwork.
16
.
F
Go to page 19