GREASE MESH FILTERS
The filters should be hand-wash as they are not dishwasher safe. Soak them for about 3 minute in
water with a grease-loosening detergent then scrub gently with a soft brush. Do not apply too much
pressure, to avoid any damage.
Filters should be washed separately from kitchen utensils. Do not to use any kind of rinse aid.
TROUBLESHOOTING
Fault
Light on, but motor
does not work
Light does not work,
motor does not work
Oil leakage
Lights not working
Insufficient suction
The Range hood is
leaning
Possible Cause
Fan switch turned off
Fan switch failed
Motor failed
House fuses blown
Power cord loose or disconnected
No return valve and the outlet are
not tightly sealed
Leakage from the connection of
chimney and cover
Broken/Faulty LED lamps
The distance between the range
hood and the cooking surface is
too high
The fixing screw not tight enough
Select a fan switch position.
Contact service center.
Contact service center.
Reset/Replace fuses.
Refit cord to power outlet.
Switch power outlet on.
Take down the no return valve and
seal with sealant.
Take chimney down and seal.
Replace LED lamps as per
instructions.
Reinstall the range hood to the
correct distance.
Tighten the hanging screw and level
the hood correctly.
28
Solution