AVG AVF-306PS Instructions D'installation Et Guide De L'usager page 21

PROCÉDURE D'INSTALLATION
The hood should be positioned at a distance of 71 to 76.2 cm (28‐30'') from the cooking surface to be
effective.
1. Drill a hole 28 ¾'' X 10 ¾'' (730 X 275mm). SEE Pic 1. in the cabinet, Make sure the edge of the hole is 1.4''
wide (35mm) so that the hood is sufficiently supported..
2. Open the panel and take down the aluminum filter(PIC 2)
3. Put the hood into the cabinet (PIC 3), PUSH the buckle on the exterior side of the hood (PIC 4) and tighten
up the screws clockwise with a screwdriver (PIC 5).
Make sure the hood is correctly tighten in position
PIC1
PIC 2
21
PIC 3