Güde GE 235 TC Mode D'emploi D'origine page 20

Material and other substances hazards
Threat
Contact, inhalation
Fire or explosion
Failure to Observe Human-Factor Principles
Threat
Negligent use of personal
protection equipment
Disposal
The instructions for disposal are expressed in the pictographs on the unit or the packaging. For description
of individual meaning see chapter "Unit Marking".
Operator Requirements
The operator is required to read the instruction manual carefully before using the unit.
Please note that our equipment has not been designed for commercial, craft or industrial use. If the
equipment is used in commercial, craft or industrial operation or for similar activities, we cannot assume
any liability.
Qualification
The unit is designed to be used by trained arc welders or instructed persons of similar qualification.
Only trained persons should operate the unit. This operating manual should be made available to each
user. .
Description
Long-lasting inhalation of fumes
in the course of welding may be
health hazardous.
Easily inflammable materials
may ignite in direct area of
welding.
Oil, fuel or gas tanks may
explode at welding
Description
Welding without required
personal protection equipment
may result in health hazard.
Preventive Action
Have the fumes extracted
when welding
Work in a properly ventilated
area
Avoid direct inhalation of
fumes
Do not work near
inflammable materials.
Tanks of any kind should be
completely emptied, cleaned
and well-ventilated. Only
properly trained
professionals are allowed to
weld tanks.
Preventive Action
Use required personal
protection equipment for
welding.
20
GB
Residual Hazard
Residual Hazard