Metabo HPT C 7WDM Mode D'emploi page 26

English
45° guide notch
45° 90°
2. Using hanging hook
WARNING:
Hanging hook
Fig. 21
3. Using auxiliary handle
Auxiliary handle
26
90° guide notch
To reduce the risk of injury from the saw falling on operators or
bystanders, make sure the saw is supported securely when using
the hanging hook to hang the saw from a rafter, joist or other
elevated support.
(1) Turn the hanging hook away from the saw body to
(2) When not in use, return the hanging hook back to the
Trigger switch handle
Fig. 22
Inner guide
notches
Fig. 20
hang the saw from a rafter, joist or other elevated
support.
WARNING:
To reduce the risk of injury, do
not use the saw with the hanging hook rotated
below the base plate.
storage position until it latches against the saw body.
When operating the saw, use both hands
to hold the saw fi rmly, one hand on the
auxiliary handle and the other hand on
the trigger switch handle, to increase the
stability of the saw operation to avoid the
possible kickback occurred.
Base plate
Inner guide
notches