Parts Identification - Sony NSBK-DH05 Manuel D'installation

Parts Identification

Display Accelerator Board (installed on NSR-500)
A HDMI output connector
Use this connector to connect a monitor
that supports HDMI input.
B Monitor connector 2
Use this connector to connect a monitor
that supports analog RGB input.
Caution
• After this board is installed, monitor
connector 1 will no longer be available
for use. Only monitor connector 2 will be
available.
• Monitor connector 2 and the HDMI
output connector cannot be used at the
same time.
1
2
Parts Identification 5