Sony NSBK-DH05 Manuel D'installation page 7

2
Confirm the installation position.
Install the display
accelerator board here.
Rear panel side
3
Pull the protection cover upward and
remove it.
4
5
Step 1: Installing the Display Accelerator Board on the NSR-500
Insert the display accelerator board
with the proper orientation.
Install the display accelerator board.
Make a visual check at the following
two points and confirm that the board
is firmly connected.
Make a visual check.
Caution
Incomplete and/or skewed insertion of
the board can cause improper
connection.
7