Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
OPERATION
1.
Ensure that the appliance is standing on a suitable, level substrate, and has
been set up so that it is safe and stable.
2.
Do not use in the bathroom or damp location
3.
Locate the fan on the floor where is convenient to a supply socket.
4.
Plug the power cord into an electrical outlet (220–240 V~, 50 Hz).
5.
If moving the fan to a different location, switch off and unplug from the
mains.
Tilt angle
6.
You can tilt the motor housing vertically to a certain extent. To do this, press
the motor housing into the desired tilt angle. To avoid damage to the appli-
ance, do not use force.
Setting the speed
7.
Switch on the appliance by selecting one of the three speed levels and
pressing the appropriate button:
ƒ Level 1: Light breeze
ƒ Level 2: Moderate breeze
ƒ Level 3: Strong breeze
ƒ Level "0" switches off the appliance.
8.
You can change the speed levels at any time.
Swing function/oscillation function
9.
Press the oscillation button on the rear of the appliance head downward.
The appliance now swings autonomously.
10. If you want to switch off the swing function, pull the oscillation button
upward.
Switching off
11. Press the button "0" to switch the appliance off. When you are no longer
using the appliance, unplug the plug from the electrical outlet.
Stand 14.1.2020
Copyright UNOLD AG | www.unold.de
DE
EN
FR
NL
IT
ES
PL
19 von 56
Publicité
Table des Matières
