Unold 86820 Notice D'utilisation page 18

1 Lower stand tube
DE
2 Base
EN
3 4 screws
4 Motor housing - upper
FR
stand tube
Axle
5
NL
6 Rear basket cover
7 Nut
IT
ES
1. Before assembling, ensure that you are assembling the appliance on a level,
dry, place.
PL
2. Remove all packaging materials and transport safeguards. Keep the packag-
ing material, such as plastic bags or Styrofoam away from small children
- danger of suffocation!
3. Check whether all needed parts are present.
4. Insert the lower stand tube into the base (tab on the stand tube must be
fitted into the recess in the base).
5. Fasten the stand tube with the four screws by screwing them in on the
underside of the base.
6. Fasten the motor housing/upper stand tube by screwing it into the lower
stand tube (turn clockwise).
7. Remove the nuts from the motor housing.
8. Fasten the rear basket cover on the motor housing by fixing the cover in
place with the nut.
9. Place the impeller on the axle on the motor housing. Fix the impeller in
place with the fastening ring (turn counter-clockwise). Check whether the
fan blades move freely.
10. Connect the front basket cover to the rear basket cover. Ensure that the
holes for the fastening screw at the bottom of the basket covers are lined
up. Fix the basket covers in place with the screw.
11. Check whether all parts have been correctly assembled and fixed in place.
18 von 56
Copyright UNOLD AG | www.unold.de
8
9
10
Impeller
Fastening ring
Front basket cover
Stand 14.1.2020