Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
DE
OPERATION
EN
1.
Ensure that the appliance is standing on a suitable, level substrate, and has
been set up so that it is safe and stable.
FR
2.
Plug the power cord into an electrical outlet.
NL
3.
Press the ON/OFF button once to switch the appliance on.
IT
Setting the speed
4.
Press the „Speed" button until the appliance is working at the desired
ES
speed. The setting is shown by the respective indicator light:
PL
Low speed:
Medium speed:
High speed:
Swing function/oscillation
Press the „Oscillation (Swing)" button to switch on the swing function.
Press the button again to stop the appliance in the current position, the fan
however continues to run.
Timer
5.
Via the Timer button you can select the desired runtime of the appliance.
This is possible in the range 0.5 to 7.5 hours in increments of 30 minutes
(e.g. 0.5 hours, 1 hour, 1.5 hours, etc.). Press the „Timer" button until the
indicator light for the selected time is illuminated. After this time elapses
the appliance switches off automatically. If you do not make a time setting,
the appliance will run continuously.
Switching off
6.
Press the „ON/OFF" button again or the „ON/OFF" button on the remote
control unit to switch off the appliance. When you are no longer using the
appliance, unplug the plug from the electrical outlet.
20 von 60
Copyright UNOLD AG | www.unold.de
Low
Med
High
Stand 26.2.2020
Publicité
Table des Matières
