Operation - Unold 86815 Notice D'utilisation

1. Before assembling, ensure that
you are assembling the appliance
on a level, dry, place.
2. Remove all packaging materials
and transport safeguards. Keep
the packaging material, such as
plastic bags or Styrofoam away
from small children - danger of
suffocation!
3. Check whether all needed parts
are present.
4. Pull the supply line of the motor
housing through the opening in
the base.
5. Fix the base and motor housing in
place by firmly turning the motor
housing clockwise,
motor housing audibly locks in
place (tab on the motor housing
and recess must be properly fitted
into each other).

OPERATION

1. Ensure that the appliance is stan-
ding on a suitable, level subst-
rate, and has been set up so that
it is safe and stable.
2. Plug the mains plug of the appli-
ance into an electrical outlet
(220–240 V~, 50 Hz).
3. If moving the fan to a different
location, switch off and unplug
from the mains.
Setting the tilt angle
4. You can tilt the motor housing
verticaly to a certain extent. To do
this, press the motor housing into
the desired tilt angle. To avoid
damage to the appliance, do not
use force.
6.
7.
8.
9.
until the
10. Check whether all parts have been
Setting the speed
5.
ƒ Level 1: Light breeze
ƒ Level 2: Moderate breeze
ƒ Level 3: Strong breeze
ƒ The button "0" switches off the
6.
Swing function/oscillation function
7.
Copyright UNOLD AG | www.unold.de
Remove guard lock nut from the
motor shaft spindle.
Fasten the rear basket cover by
fixing the cover in place with the
nut.
Place the impeller on the axle on
the motor housing. Check whe-
ther the fan blades move freely.
Fix the impeller in place with
the fastening ring (turn counter-
clockwise).
Connect the front basket cover to
the rear basket cover. Ensure that
the holes for the fastening screw
at the bottom of the basket covers
one above the other. Fix the bas-
ket covers in place with the screw.
correctly assembled and fixed in
place.
Switch on the appliance by selec-
ting one of the three speed levels
and pressing the appropriate but-
ton:
appliance.
You can change the speed levels
at any time.
Press the oscillation button on the
head of the appliance downward.
The appliance now swings auto-
nomously.
15