Güde GBS 80 Mode D'emploi Original page 11

Any other use will be considered a use in conflict with
designation. The manufacturer will not be liable for
any indirect damages and injuries.
Please be sure to know that the appliance has not
been designed for industrial purposes.
Disposal
The disposal instructions are based on icons placed on the
appliance or its package. The description of the meanings
can be found in the "Marking" section.
Transport package disposal
The package protects the appliance against damage
during transport. Packing materials are usually chosen
depending on their environmental friendliness and disposal
method and can therefore be recycled.
Returning the package to material circulation saves raw
materials and reduces waste disposal costs.
Parts of packages (e.g. foils, styropor®) can be dangerous
to children. Risk of suffocation!
Keep parts of packages away from children and dispose
them as soon as possible.
Operator requirements
The operator must carefully read the Operating
Instructions before using the appliance.
Qualification
No special qualification is necessary for using the
appliance apart from detailed instruction by an expert.
Minimum age
The appliance can only be operated by persons over 16
years of age. An exception includes youngsters operating
the appliance within their professional education to
achieve necessary skills under trainer's supervision.
Training
Using the appliance only requires appropriate instructions
by a professional or reading the Operating Instructions. No
special training necessary.
Maintenance
Do you have any technical questions? A claim? Do you
need spare parts or the Operating Instructions?
You will be helped quickly and without needless
bureaucracy at our webpage www.guede.com in the
Services part. Please help us be able to assist you. To be
able to identify your appliance when claimed, we need to
know its serial No., order No. and year of production. All
these details can be found on the type label. Enter the
details below for future reference.
Serial No.
Order No.
Year of production:
Tel.: +49 (0) 79 04 / 700-360
Fax: +49 (0) 79 04 / 700-51999
E-Mail: support@ts.guede.com
Troubleshooting
Failure Cause
Poor grinding Grindstone is
results worn
Appliance not Appliance fuse
working (2 A) is defective
Servicing and storing
Keep the appliance with no dust and dirt.
Use a soft cloth and fine soap water solution for cleaning.
Avoid direct appliance contact with aggressive cleaning
agents. Aggressive, volatile and caustic cleaning agents
must not be used.
Once a year, have the drill grinder checked by a qualified
authorised professional.
The appliance must be protected against moisture and
dust.
If the appliance is not used for a long time, keep it covered
in a dry, safe place inaccessible to children.
Servicing table
Before starting
your work
After finishing
your work
Grindstone replacement
To replace the grindstone, remove the protection cover
(pic. 1/8). Release the grindstone using an Allen wrench.
Remedy
Replace the
grindstone
Replace the
appliance fuse
(2 A)
11
Check the grindstone, feeder cable
and the whole appliance for any
damage
After using the drill grinder, wipe it
with a well screwed cloth so that the
surface and ventilation slots are
always with no dust and dirt.