Publicité
ENGLISH
6
LOADING DISCS
Set discs in the disc tray with the labeled (printed)
2
side facing up.
12 cm disc guide
Disc tray
8 cm disc guide
NOTE:
• Do not move the DVD-M330 while a disc is
playing. Doing so may scratch the disc.
(1) Opening and Closing the Disc Tray
q Turn on the power.
w Press the OPEN/CLOSE button.
OPEN/CLOSE button
Disc tray
Power button
NOTES:
• Be sure to turn on the power before opening
and closing the disc tray.
• Do not strike on the button with a pencil, etc.
(2) Loading Discs
• Pick up the disc carefully so as not to touch the
signal surface and hold it with the labeled side
facing up.
• With the disc tray fully open, set the disc in the disc
tray.
• Set 12 cm discs in the outer tray guide (Figure 1), 8
cm discs in the inner tray guide (Figure 2).
• Press the OPEN/CLOSE button. The disc is
automatically loaded.
• The disc tray can also be closed automatically to
load the disc by pressing the PLAY button.
Figure 1
Outer disc tray
12 cm disc
Figure 2
Inner disc tray
8 cm disc
NOTES:
• If your foreign object is caught in the disc tray
during closing, simply press the OPEN/CLOSE
button again and the tray will open.
• Do not press the disc tray in by hand when the
power is off. Doing so will damage it.
• Do not place foreign objects in the disc tray.
Doing so will damage it.
7
CHANGING THE DEFAULT SETTINGS
Make the initial settings to suit your usage conditions before starting playback.
2
The initial settings are retained until they are next changed, even if the power is turned off.
1
Turn on the power.
1
• Press the power button, the power indicator lights green
and the power turns on.
In the stop mode, press the DVD SETUP button.
• The setup (default settings) screen appears.
NOTE:
• For some menus, the initial values can be changed during
playback.
VIDEO SETUP
Use this to set the DVD-M330's screen mode.
(TV aspect, TV type and AV1 video output.)
AUDIO SETUP
Use this to set the DVD-M330's audio output mode.
(Digital and LPCM output settings.)
2
DISC SETUP
Use this to set the language to be used when playing the
disc.
If the set language is not offered on that disc, the discs
default language is set.
SYSTEM SETUP
On-screen display language setting: The initial settings
screen's language setting, etc., the viewing restriction level
and playback of adult DVDs you do not want children, etc., to
see can be restricted. The number of initial setting items can
be increased.
Use the
and
cursor buttons to select the desired
0
1
setting item.
Select "VIDEO SETUP". (See page 12, 13.)
3
Select "AUDIO SETUP". (See page 13, 14.)
Select "DISC SETUP". (See page 14, 15.)
Select "SYSTEM SETUP" (See page 16.)
To exit the setup mode
Press the RETURN or DVD SETUP button.
ENGLISH
Set the remote
-
control selector
switches to DVD and
2
DVD.
3
ENTER
Green
Main unit
Remote control unit
VIDEO SETUP
TV ASPECT
4 3 PS
TV TYPE
MULTI
VIDEO OUT
S-VIDEO
AUTO
VIDEO MODE
SLIDE SHOW
5 SEC
SELECT
SET ENTER BUTTON
SET TV ASPECT
For the display of items marked "
see page 13.
ENTER
Remote control unit
Remote control unit
",
11
Publicité
Chapitres
