Publicité
ENGLISH
5
PART NAMES AND FUNCTIONS
(1) Front Panel
See page 3.
q
Power operation switch
(ON/STANDBY)
• Press this once to turn the power on. Press
again to set to the standby mode.
w
Power indicator
• This indicator lights when the power is on.
• The LED color changes as follows, according
to the condition:
• During power ON:
green
• During STANDBY:
red
e
PROGRESSIVE SCAN button
• Press this to switch the component video
output
between
PROGRESSIVE
INTERLACED SCAN.
r
Remote control sensor
t
Display
• Information on the disc that is currently playing
is shown on the display. (See page 10.)
y
Skip button (
)
8
• Press this to move back to the beginning of
the current track (or chapter).
• Press again to move back to the beginning of
the previous track (or chapter). (See page 18.)
u
Skip button (
)
9
• Press this to move ahead to the beginning of
the next track (or chapter). (See page 18.)
10
i
STOP button (
)
2
• Press this to stop the disc. (See page 18.)
o
PLAY button (
)
1
• Press this button to play the disc (See page
17.)
!0
OPEN/CLOSE button
(
OPEN/CLOSE)
5
• Press this button to open and close the disc
tray.(See page 11.)
!1
Disc tray
• Load discs here. (See page 11.)
• Press the OPEN/CLOSE button
and close the disc tray.
and
• The disc tray is also closed when the PLAY
o
button
is pressed.
(2) Rear Panel
!2
SYSTEM CONNECTORS
(1 and 2)
• Connect the DVD-M330 and AVR-M330 using
the included system cable.
For instructions on connecting, see the AVR-
M330's operating instructions.
!3
Digital audio output connectors
(OPTICAL)
• Connect using an optical fiber cable (available
in stores).
• Digital data is output from this connector.
!4
Audio output connectors
!0
to open
(AUDIO OUT)
• Connect using the included audio cord.
(3) Display
Lights to indicate the currently playing disc.
These light to indicate the names of the sections of the disc
being played.
Lights in the still/pause mode.
Lights during playback, flashes when the resume play memory function is activated.
!5
S-Video output connector
(S-VIDEO OUT)
• Connect using an S-Video connection cord
(available in stores).
!6
Video output connector (VIDEO OUT)
• Connect using the included video cord.
!7
21-pin SCART terminal (AV1)
• Connect using a 21-pin SCART cable (available
in stores).
!8
Component video output connectors
(COMPONENT VIDEO OUT)
• Connect using video cords (available in stores).
Lights in the
Lights in the random play mode.
programmed play
Lights when progressive video
mode.
signals are being output.
Displays the title, track number and
Lights in the
elapsed time during playback.
repeat play
mode.
Publicité
Chapitres
