Establishing The Data Connection; Possible Communication Channels; Connect The Inverter To The Ohmpilot - Fronius Ohmpilot Instructions De Service

Establishing the data connection

Possible commu- The data connection is required for communication between the inverter and the Ohmpi-
nication channels lot. The inverter mainly sends default values to the Ohmpilots. For some applications it is
necessary to make settings via the Ohmpilot website.
There are 3 possible communication channels:
-
-
-
NOTE!
Minimum software version.
An inverter from the SnapInverter series (Datamanager 2.0) must have at least software
version 3.8.1-x.
Connect the in- Each inverter with a Fronius Smart Meter automatically connects itself to the Ohmpilot.
verter to the However, if there is more than one inverter with Fronius Smart Meter in the network, the
Ohmpilot wrong inverter can be connected. In this case, the Ohmpilot can be manually connected
under System Information on the website of the inverter to be connected.
Information on how to access the inverter website can be found in the "Fronius Datama-
nager 2.0" Operating Instructions.
Ethernet / WiFi
or Modbus RTU
Modbus RTU (via RS 485)
LAN (Ethernet)
WLAN
Ethernet / WiFi
99