Safety rules
Explanation of
safety notices
Indicates immediate danger.
▶
Indicates a potentially hazardous situation.
▶
Indicates a situation where damage or injury could occur.
▶
NOTE!
Indicates a risk of flawed results and possible damage to the equipment.
General
The device has been manufactured in line with the state of the art and according to reco-
gnized safety standards. If used incorrectly or misused, however, it can cause:
-
-
All personnel involved in commissioning, maintenance, and servicing of the device must:
-
-
-
The Operating Instructions must always be at hand wherever the device is being used. In
addition to the Operating Instructions, attention must also be paid to any generally appli-
cable and local regulations regarding accident prevention and environmental protection.
All safety and danger notices on the device:
-
-
-
-
The terminals can reach high temperatures.
Only operate the device when all protection devices are fully functional. If the protection
devices are not fully functional, there is a danger of:
-
-
Any safety devices that are not fully functional must be repaired by an authorised specia-
list before the device is switched on.
Never bypass or disable protection devices.
DANGER!
If not avoided, death or serious injury will result.
WARNING!
If not avoided, death or serious injury may result.
CAUTION!
If not avoided, minor injury and/or damage to property may result.
Injury or death to the operator or a third party
Damage to the device and other material assets belonging to the operating compa-
ny.
Be suitably qualified
Have knowledge of and experience in dealing with electrical installations and
Have fully read and precisely followed these Operating Instructions
Must be kept in a legible state
Must not be damaged
Must not be removed
Must not be covered, pasted or painted over
Injury or death to the operator or a third party
Damage to the device and other material assets belonging to the operating company
63