Sony MCS1 Mode D'emploi page 15

1
Turn on the MCS1, insert a CD-R, and then wait for it to be
detected.
For details, see "Inserting the CD-R" on page 11.
2
Using the USB cable supplied with the digital still camera,
connect the camera to the MCS1.
3
Turn the digital still camera on and set it to the PLAY* mode.
The usage status of the camera memory is shown in the display
window. After about two seconds, the display changes as follows.
* Mode for viewing images. The actual name may differ depending on the digital
still camera. For details, see the section on connecting to the computer in the
operating instructions supplied with your digital camera.
Note
Make sure that the digital still camera has sufficient battery capacity before starting
the copy process. If the battery fails during copying, data is not written correctly.
z
Hint
If the size of the data to be copied exceeds the remaining capacity of the CD-R,
you can split the data over several CD-R. For details, see "Copying data larger
than the remaining CD-R capacity" on page 20.
b
Continued on next page
GB
15