Copying Data From A Digital Still Camera - Sony MCS1 Mode D'emploi

When the copying process is finished...
You can continue to copy the same data to another CD-R. For details, see
"Copying the same data to multiple CD-R" on page 20.
To shut down the MCS1, proceed as follows.
1
2
3
4

Copying data from a digital still camera

You can connect most USB-compatible digital still cameras to the MCS1 to
copy their data to a CD-R. Use the USB cable supplied with your camera to
make the connection.
You can find the latest information about compatible digital cameras at:
http://www.sony.net/photovault/
Note
It is not possible to copy specific files only.
GB
14
Hold down the POWER button to turn the MCS1 off.
Pull the "Memory Stick" media straight out of the Memory
Stick slot.
Note
The MCS1 cannot erase data on a "Memory Stick" media. If you wish to erase the
contents of a "Memory Stick" media, use the digital still camera, computer or other
device where the "Memory Stick" media is normally used. Before doing so, verify
that the data was correctly written to CD-R. Verify this by playing it on the MCS1
and using the video output, or by playing it on a computer or other device.
Remove the CD-R.
(1) Push and slide the OPEN lever to open the cover.
(2) While pressing the center of the disc, grasp the edges of the
CD-R and lift it out.
Close the cover.