Basic Instructions; Status Of Operation Manual; Purpose Of Use; Adverse Conditions Of Use - ALFRA SKF 63-15 Notice D'utilisation

1.

Basic Instructions

1.1

Status of Operation Manual

The Operation Manual is an important document for a safe operation of the Bevel Milling Machine.
Before using the Bevel Milling Machine this Operation Manual is to be read and understood by the
operating crew.
1.2

Purpose of Use

The Bevel Milling Machine is to be used to bezel metallic materials and herewith for the preparation of
weld. It is only to be used with tools delivered from the manufacturer and in observance of the
technical instructions of this Operation Manual (material, capacity, advance, dimensions). The Chapter
„Basic Safety Instructions" must be observed.
If other tools, materials or dimensions are required, advice and written agreement of the
manufacturer are absolutely imperative.
1.3

Adverse conditions of Use

All others as in „Purpose of Use" defined actions are regarded as inappropriate and therefore to omit.
1.4

Warranty

The manufacturer grants a warranty of 12 months. For our ALFRA Bevelling and
Deburring Machines we grant guarantee according to the legal and regional regulations
(proven by invoice).This warranty is only valid with the carrying out of the instructions of
the Operation Manual and correct purpose of use.
The manufacturer is not legally liable for damages, caused by abuse, or misuse of
instructions of this Operation Manual.
Rights to claim under guarantee are out of question, in case the Bevel Milling Machine
is, without written authorization of the manufacturer, changed in construction or
functional execution. If the electric tool is modified without our authorization, this
declaration will lose its validity and the guarantee expires.
1.5

Issuing date of Operation Manual

This Operation Manual is issued in version of Dec.17
1.6

Copyright

The Copyright of this Operation Manual remains at ALFRA GmbH. This Operation Manual is only for
the operating authority and its crew. It contains regulations and instructions, which, neither complete
nor partially, aren´t permitted to
duplicate
distribute or
notified in any other way.
Violations can cause persecution.
1.7 Manufacturers´ Address
For inquiries, comments or spare part-orders please contact:
or your local ALFRA dealer.
Alfred Raith GmbH
2. Industriestraße 10
68766 Hockenheim
th.
2002, completes in August 2009.
Tel. 06205-3051-0
FAX 06205-3051-150
Internet: www.alfra.de
E-Mail info@alfra.de
18