Recommended Carbide Milling Plates; Dimensions (Mm) - ALFRA SKF 63-15 Notice D'utilisation

6.

Recommended Carbide Milling Plates

for ALFRA Bevel Milling Machine SKF 63-15
Carbide
Type
Tenacious type, also suitable for wet
HB 7535 processing and moderate cutting speed.
(P30/40) Ideal for difficult conditions as well as for
(M20/M35) stainless steel. Finest grain with TiAIN/TiN-
PVD multi-layer coating
Tenacious type, also suitable for wet
HB 7535 processing and moderate cutting speed.
(P30/40) Ideal for difficult conditions as well as for
(M20/M35) stainless steel. Finest grain with TiAIN/TiN-
PVD multi-layer coating
HB 7535 Carbide indexable insert, TiAIN/TiN-PVD
(P30/40) multi-layer coating for Steel < 1400 N/mm
(M20/M35) Inox <> 900 N/mm
Application Range
ALFRA Prod.-No.: 25013
ALFRA Prod.-No.: 25010.15036B
ALFRA Prod.-No.: 25010.15036E
2
ISO- Indication
SPUN
120308 / 213510
SEER
1203AFENJSF7030
(close fit)
positive geometry,
Sharp cutting edge
SPMR
2
; 120308
AF.SN
Dimensions
(mm)
12,7 x 12,7 x 3,18
draft angle 11°
flat
12,7 x 12,7 x 3,18
draft angle 20°
circular cavity for
chips
12,7 x 12,7 x 3,18
Draft Angle 11°
circular cavity for
chips
26