Foreword; Ec Declaration Of Conformity - Habegger HIT 6 Mode D'emploi

Foreword

You have made a good selection with the HABEGGER HIT wire rope hoist.
Perhaps you already know how your newly acquired rope pulling machine works.
Nonetheless, we would like to make the following recommendations:
Read these operating instructions carefully prior to starting up the machine for the first time! It contains
all necessary information to help you avoid accidents and injuries, to reduce repair costs, and to
increase the serviceable life of your rope pulling machine.
Always keep these operating instructions on site with the wire rope hoist, and make sure that every
person who operates the machine reads and observes the instructions. The manual must be readily
accessible to all persons operating the machine in order to avoid operating errors.
In addition to the operating instructions and the binding regulations on accident prevention prevalent in
the country of use and at the work site, the acknowledged technical rules for working safely and
properly should be observed.
We hope your work with this HABEGGER product will be enjoyable and successful.
Translation
EC Declaration of Conformity for the HIT 6, HIT 10, HIT 16, HIT 32 wire rope hoists,
including special editions of HIT series
We, HABEGGER Maschinenfabrik AG
Mittlere Strasse 66
CH-3600 Thun Switzerland
Hereby declare that the machine described below complies with the basic safety and health
requirements of the EC Directive Machines as regards its design and construction as well as the
version put on the market by us. If the machine is altered without consulting us, this declaration shall
become invalid.
Applicable EC directive:
Applicable harmonized standards:
EN ISO 12100 -1
EN ISO 12100 -2
EN 13157
Authorized person:
Date/Signature of manufacturer:
Function of the signatory:
30
EC Machinery Directive (2006/42/EC)
Fritz Böhlen
May 2011
Technical Manager