Operation - ESAB A6 SFD1 Manuel De L'opérateur

OPERATION

1. Careful joint preparation is essential for good welding results.
NOTE! The gap in the weld joint must be uniform.
2. To minimize the risk of hot cracking the width of the weld should be larger than
the penetration.
3. Always weld a test piece with the same joint preparation and plate thickness as
the intended production piece.
NOTE! NEVER make a trial weld on a production work piece.
Operating instructions for control box PEG1
See operating manual PEG1 order no. 443 392.
dfa3o1ea
- - 9 - -
OPERATION