Wall Mounting; Electrical Connections - Camille Bauer SINEAX TV 808-11 Mode D'emploi

9.2 Wall mounting

While pressing the latch (4) in the base of the device (Fig. 6,
left) pull out the isolating amplifi er securing brackets (1). To
return the brackets to their original positions, the latch (5) in
the base of the device has to be depressed before applying
pressure to the securing brackets (1) (see Fig. 6, right).
(1)
(2)
(3)
(2)
(4)
(1)
Drill 2 holes in the wall or panel as shown in the drilling pat-
tern (Fig. 7). Now secure the power pack to the wall or panel
using two 4 mm diameter screws.
Fig. 7. Drilling pattern.

10. Electrical connections

The electrical connections are made to screw terminals which
are easily accessible from the front of the power pack and
can accommodate wire gauges up to max. 2.5 mm
Make sure that the cables are not live when
making the connections!
The 230 V power supply is potentially dan-
gerous!
In the case of "Intrinsically safe" explosion-
proof versions [EEx ia] IIC, the supplementary
information given on the Type Examination
Certifi cate and also local regulations applicable
to electrical installations in explosion hazard
areas must be taken into account.
18
(1)
Fig. 6. Rear of device.
(1) Screw hole brackets
(2) Top-hat rail clip
(3) Rubber buffers
(4) Latch for pulling the
(5)
screw hole brackets
out
(5) Latch for pushing
(1)
the screw hole
brackets in
2
.
Note that, ...
... the data required to perform the electrical
insulation task agree with the data on the nameplate
of the SINEAX TV 808 (
and power supply H!
... the input and output cables should be twisted
pairs and run as far as possible away from heavy
current cables!
In all other respects, observe all local regulations
when selecting the type of electrical cable and
installing them!
Front
1 6 11 1 6
2 7 12
SINEAX
TV 808
Camille Bauer AG
CH-5610 Wohlen
Switzerland
Span
Zer o
ON
3 8
4 9 4 9
5 10 5 10
Without With
transparent cover transparent cover
1 6 11
– I+ U+
E
E = Input
A = Output
H = Power supply
input E, output A
11
Space e.g.
for MSK designation
Green LED for
ON
device standing by
4 9 5 10
– + – +
A H