Steba PG 2.0 Pro Select Mode D'emploi page 13

∙ Be sure that the hot plates are firmly engaged.
∙ Before turning the plates, let the appliance cool off, pull out
mains plug.
∙ Do not bend the connection cable or bring it into contact with hot
parts of the appliance.
∙ After use, pull out the plug immediately, open the appliance and
let it cool off.
∙ Let appliance cool off before transport.
∙ Carefully lock top and bottom plate before transport.
∙ Never immerse appliance in water for cleaning.
∙ This product satisfies the pertinent safety regulations for elec-
trical appliances.Repairs on electrical appliances must be perfor-
med by trained personnel only. Considerable dangers can arise
for the user from improper repairs.
Attention! Housing get hot. Danger of burns!
∙
During opperation the temperature of accessible sur-
faces may be high. Do not place the appliance on a sen-
sitive surface (e.g. painted furniture) and keep a distance of at
least 70cm to burnable materials.
∙ When using a power cord extension it is important that children
are not pulling at it or a trip hazard occurs.
∙ Never put aluminum foil between the plates, as the appliance
can overheat.
Cleaning
Caution: Pull out the mains plug before every cleaning.
∙ The hot plates can be better cleaned if they are still somewhat warm.
∙ Remove the hot plates from the appliance and clean with wash brush
and detergent only. Do not use any scouring agents, soaped steel
wool or metal scraper, since otherwise the anti-sticking coating will
be damaged.
∙ Do not put in the dishwasher.
∙ For cleaning the appliance surface and all other parts such as hand-
les, adjusting hinges, etc. a moist cloth, possibly with a little deter-
gent is sufficient.
13