Keypad, Modes, And Led - Stanley CUBIX Mode D'emploi

bix_GB_STHT77340.indd 9

Keypad, Modes, and LED

Keypad /Switch
Self-leveling Off
• Move
the laser tool ON.
• To turn the laser tool OFF, move
position
• All beams OFF
Modes
Laser Beam Available Modes
• Cross Line ON (
Vertical Beam Line ON
All beam lines OFF
•
Self-Leveling (See figures
• The pendulum lock on the laser tool needs to be
switched to the unlocked position to enable self-
leveling.
Manual Mode (See figures
• The laser tool can be used with the pendulum lock
in the locked position when it is required to position
the laser tool at various angles to project non-level
straight lines.
Power OFF/ Pendulum Lock ON
Pendulum lock off /Self-leveling On
Pendulum lock on /Manual mode/
to the locked or unlocked position to turn
): Horizontal Beam Line and
D
1
and )
D
C
and )
C D
LED/Out-of-Level Indicator Operation (See figure
# 5 )
A
LED OFF
1.
2.
LED ON /Solid RED
to the centre
laser unit is out of level.
QuickLink ™ Bracket Overview
Figure F -QuickLink ™ Bracket
10. T-nut to mate with slots on Laser Unit.
11. Jaw Tightening Knob.
12. Bracket Tightening Knob .
13. Hang holes for screw mounting. (34mm apart)
14. 1/4-20" threaded mount.
15. Adjustable Jaw
Bracket Applications
• The QuickLink bracket can be mounted in various
positions by clamping the jaws to round or flat objects
such as a tripod pole, door or bench.
• The QuickLink bracket can be mounted on a vertical
surface using the hang holes provided. (See figure
#13)
F
• The QuickLink bracket can be attached to the laser unit
using the 1/4-20 threaded mount (Figure
figure
Power is OFF/ Pendulum Lock is ON
Power is ON, pendulum lock is OFF
laser unit is within self-leveling range.
ower is ON, pendulum lock is OFF,
• or
• Power is ON , pendulum lock is ON/ Self-
Leveling is OFF.
#1) or the t-nut and slot. Figure
A
01/07/2013 15:3
and
and
#14 and
F
#10
F
9
STHT77340