Maintenance And Care; Environmental Protection - Stanley FatMax CL2 Manuel D'instructions

MAINTENANCE AND CARE

The CL2 is not waterproof. Do not allow the unit to get wet. Damage to
internal circuits will result.
Do not leave the CL2 out in direct sunlight or expose it to high temperatures.
The housing and some internal parts are made of plastic and may become
deformed at high temperatures.
Do not store the CL2 in a cold environment. Moisture will form on interior
parts when warming up. The moisture could fog up laser windows and cause
corrosion of internal circuit boards.
When working in dusty locations, some dirt will collect on the laser window.
Remove any moisture or dirt with a soft, dry cloth. Do not use aggressive
cleaning agents or solvents.
Store the CL2 in its case when not in use. Remove batteries before storage
of the instrument.

ENVIRONMENTAL PROTECTION

Recycle raw materials instead of disposing as waste.
The machine, accessories and packaging should be sorted for
environmental-friendly recycling.
Do not throw used batteries into house waste, fire or water but dispose of in
an environmentally friendly manner according to the applicable legal
regulations.
8 • CL2