Product Overview; Keypad, Modes, And Led - Stanley FATMAX FMHT77356 Mode D'emploi

Product Overview

Figure A - Laser Tool
1. Laser Window/Aperture
2. Keypad Switch
3. Power/pendulum Lock Switch
4. DC Power supply jack
Figure B - Power /Transport Lock
5. Label
6. 1/4-20 and 5/8-11 threaded mount
Figure C - Keypad and Laser Modes
7. Battery/Power
8. Beam Activation Key
9. Pulse Mode Activation Key
10. Pulse Mode/Out of level indicator LED
Figure D - Beam Options
Figure E - Horizontal Beam Scan Direction Accuracy
Figure F - Horizontal Beam Pitch Direction Accuracy
Figure G - Vertical Beam Accuracy
Figure H - Vertical Beam 90° Accuracy

Keypad, Modes, and LED

Power /Pendulum Lock Switch (Fig B)
Power ON/Pendulum lock off /Self-leveling
On
Power OFF/Pendulum lock on
• To turn the laser tool ON move switch to the
unlocked position
• To turn the laser tool OFF, move switch to the locked
position
Modes
Laser Beam Available Modes.
See Figures C and D for beam configuration.
Self-Leveling (Fig B)
• The pendulum lock on the laser tool needs to be
switched to the unlocked /ON position to enable
self-leveling when placed in a position <4 °.
Out of Level (Fig B)
• If the laser has been tilted > 4° then it cannot
self-level and the laser beam will flash.
Keypad-Pulse key.
Pulse mode ON/OFF key
(See figure
Press to activate Pulse mode.
(See figure # 9)
Pulse Mode LED/Out-of-Level Indicator Operation
(See figure # 10)
LED OFF
1. Pulse Mode is OFF/ Unit is level
LED ON-CONTINUOUS GREEN
2. PULSE MODE is ON, and laser unit is within self-
leveling range. (<4 °)
LED ON-FLASHING RED
3. Laser unit is OUT OF LEVEL and beams will flash.
(PULSE MODE may be ON or OFF depending on
initial state set.)
Keypad-Battery key
Battery level indicator key
(See figure
Battery Life LED
(See figure # 7)
LED ON-CONTINUOUS GREEN
1. Battery life >25%
LED ON-FLASHING RED
2. Battery life <25%
LED OFF
3. Battery needs recharging. Laser Beams shut off.
)
)
5