Operation; Setting The Clock; Setting The Kitchen Timer - SilverCrest SMW 800 C3 Mode D'emploi

3) Press Start/Quick start
process.
NOTE
► During initial use, the generation of light
smoke and a slight smell can occur, this is due
to the production residues. This not harmful.
Provide for sufficient ventilation. For example,
open a window.
4) After 3 minutes, the appliance will switch itself
off automatically. Signal tones sound.
5) Open the door. Wait until it has cooled down
completely.
6) Pull the mains plug from the socket and then
clean the appliance, the rotator assembly
and the glass plate
then dry it thoroughly.

Operation

Setting the clock

When you use the microwave oven for the first time,
or there has been a power cut, the display
shows "1 : 0 1".
1) Press and hold the Timer/clock button
"Hr 12" appears on the display
If you want to switch to 24-hour mode, turn
the control dial until "Hr 24" appears.
Confirm your selection by pressing the Start/
Quick Start button
2) Now set the required hour by turning the
control dial .
3) Press the Start/Quick start button
The minute indicator appears.
4) Now set the required minutes by turning the
control dial .
5) When the clock is correctly set, press the Start/
Quick Start button
indicate that the clock is running.
SMW 800 C3
to start the grilling
with a damp cloth and
until
.
.
.
. The colon blinks to

Setting the kitchen timer

The microwave oven is provided with a kitchen
timer which you can use independently of the
microwave operation.
1) Press the Timer/clock button
appliance is in standby mode. "00:00"
and the icon for the kitchen timer
on the display .
2) Set the desired time using the rotary dial
You can select any time range from 10 seconds
to 95 minutes.
3) Press the Start/Quick start button
The appliance beeps. The countdown begins.
► To stop the countdown timer, press the Stop
button . The kitchen timer is cancelled,
the icon disappears and the current time
appears in the display
As soon as the programmed time period has
expired, you will hear three beeps.
NOTE
► If you want to use the timer at the same time
as a cooking or grilling function, start this as
described previously while the microwave is
already running.
► After you have started the timer, the time and
settings of the selected cooking or grill function
will be shown after about 3 seconds.
The timer continues in the background, the
icon appears on the display
that the timer is active.
If you wish to check the progress of the
kitchen timer, press the Timer/clock button
. The timer appears for a short time on
the display.
If the set cooking or grill function is finished
before the time has expired, the timer will
continue to run in the background. You will
hear 3 beeps as soon as the time has expired
and the icon disappears.
when the
appear
.
.
.
to indicate
33
GB