Inserting The Turntable; Operation; Setting The Clock - SilverCrest SMW 900 EDS B4 Mode D'emploi

NOTE
► The appliance may generate light smoke and a slight smell during initial
use. This is due to the production residues and is not harmful. Provide for
suffi cient ventilation. For example, open a window.
After 5 minutes, the appliance will switch itself off automatically. Wait until it has
cooled down completely.
5) Remove the plug from the mains power socket and clean the inside of the
appliance with a moist cloth and then dry it carefully.

Inserting the turntable

Place the turntable 3 centrally on the axle in the cooking area. Ensure that it
slides completely onto the axle and is fi rmly seated.

Operation

Setting the clock

After inserting the mains plug into the socket, open the microwave door once.
The display 1 shows "1:00". Close the door again.
1) Press the clock button q
2) Turn the control dial r
and confi rm your selection by pressing the start/quick start button r
NOTE
► The time display does not appear until you subsequently turn the control
dial r
3) Turn the control dial r
selection by pressing the start/quick start button r
4) Turn the control dial r
selection by pressing the start/quick start button r
The time display is now programmed.
To read the current time of day while the microwave oven is in operation, press
the Clock button q
seconds.
SMW 900 EDS B4
. "Hr 12" appears on the display 1.
to select the required mode (24 HR or 12 HR)
, at which point you can set the time.
to select the required hour and confi rm your
to select the required minute and confi rm your
; the time is then shown on the display 1 for a few
.
.
.
GB │ IE │
17 ■