Using The Refrigerator; Energy Saving Tips - Dometic Waeco CoolMatic CD50 Instructions De Montage Et De Service

Masquer les pouces Voir aussi pour Waeco CoolMatic CD50:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 49
CD50, CRD50
➤ Connect the rectifier as shown in fig. 9, page 6.
➤ Connect the refrigerator to the rectifier (fig. 9 2, page 6):
– Red cable: positive battery terminal
– Black cable: negative battery terminal
➤ Plug the connector into the AC socket (fig. 9 1,page 6).
8

Using the refrigerator

I
NOTE
Before starting your new refrigerator for the first time, you should
clean it inside and outside with a damp cloth for hygienic reasons
(please also refer to the chapter "Cleaning and care" on page 43).
8.1

Energy saving tips

 Choose a well ventilated installation location which is protected against
direct sunlight.
 Allow warm food to cool down first before placing it in the device to keep
cool.
 Do not open the cooling device more often than necessary.
 Do not leave the cooler unit open for longer than necessary.
 Defrost your refrigerator as soon as a layer of ice forms.
 Avoid unnecessarily low temperature settings.
 Clean dust and dirt from the condenser at regular intervals.
EN
Using the refrigerator
39

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Waeco coolmatic crd50

Table des Matières