Defrosting The Refrigerator - Dometic Waeco CoolMatic CD50 Instructions De Montage Et De Service

Using the refrigerator

Defrosting the refrigerator

The appliance has two options to remove the condensation resulting from
operation:
 pass it directly outside:
Remove the drip-tray (fig. 5 1, page 5).
Connect a hose (fig. 6 2, page 5) to the outlet connections (fig. 6 1,
page 5).
 collect in the drip-tray:
Empty the drip-tray (fig. 5 1, page 5) as required.
Defrosting the freezer compartment
A
NOTICE!
Never use mechanical tools to remove ice or to loosen objects
stuck to the device.
To defrost the refrigerator, proceed as follows:
➤ Take the contents out.
➤ If necessary, place the contents in another cooling appliance, to keep
them cool.
➤ Set the temperature control knob (fig. 2 1 page 3) to "0".
➤ Leave the door open.
8.3 Undo the lock
A
NOTICE!
Only adjust the locking mechanism when the drawer is open. The
unit will be damaged if this is adjusted when the drawer is closed.
The refrigerator has a locking mechanism (fig. a 1, page 7) which is also
used to protect it during transport. The following settings are possible:
 Lock (turn wheel clockwise all the way): The drawer is locked and
secured.
To open the drawer, lift the handle up and lift the drawer out.
 Vent (turn wheel anti-clockwise all the way): The drawer is slightly open,
but fixed in position.
Use this position if you are not going to use the unit for a long time.
42
CD50, CRD50
EN