Using the refrigerator
The refrigerator must be lockable separately by means of a shut-off device in
the gas connection. The shut-off device shall be easily accessible.
➤ Connect the refrigerator to a gas source as shown in fig. e, page 7.
Use a cutting ring coupling according to EN 1949, firm and off circuit.
A hose connection is not permitted.
➤ Check all connections with leak spray. There are no leaks if no bubbles
form.
9
Using the refrigerator
!
CAUTION! Health hazard!
If you wish to cool medicines, please check if the cooling capacity
of the appliance is suitable for the medicine in question.
A
NOTICE!
Only put items in the refrigerator which can be kept at the se-
lected temperature.
Food may only be stored in its original packaging or in suitable
containers.
I
NOTE
Before using the appliance for the first time, clean it inside and
out with a damp cloth for hygienic reasons.
The cooling performance can be affected by:
– The ambient temperature
– The amount of food to be conserved
– How often you open the door
9.1
Switching on the refrigerator
Gas operation (RM122)
➤ Open the refrigerator door. In the sight glass (fig. 2 4, page 3), you can
see if the flame is burning.
➤ Make sure that the gas supply is turned on.
➤ Turn the temperature regulator (fig. f 2, page 7) to position "3".
➤ Push in the temperature regulator and keep it pressed until the burner has
ignited.
20
RM122, RM123
EN