• Disconnect the appliance from the mains
supply.
• Cut off the mains cable and discard it.
Service
• To repair the appliance contact an
Authorised Service Centre.
Product description
Cooking surface layout
Control knob
Symbol
0
Off position
1 - 6
Heat settings
Daily use
WARNING!
Refer to Safety chapters.
The heat setting
To set or change the heat setting turn the knob
to the correct heat setting. To deactivate turn
the knob to off position.
Hints and tips
WARNING!
Refer to Safety chapters.
Cookware
The bottom of the cookware must be
as thick and flat as possible.
www.zanussi.com
180 mm
1
145 mm
2
3
Function
• Use original spare parts only.
Cooking zone
1
Power indicator
2
Control knobs
3
Residual heat
WARNING!
There is a risk of burns from residual
heat.
Power indicator activates when one or more
cooking zones are activated. When you
deactivate the cooking zones the indicator
deactivates.
Cookware made of enamelled steel
and with aluminium or copper
bottoms can cause the colour
change on the glass-ceramic
surface.
13