General Safety Instructions - LaserLiner SuperCross-Laser SCL 3 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 19
The automatic 3 line laser for professional do-it-yourself enthusiasts
The 3 laser lines are readily visible and outstanding for aligning tiles, wall studding, windows, doors,
etc. The 90° position of the vertical laser lines can be used to produce a right angle on the floor and
project a plumb line on slanted walls (see Figure C on Pg. 2). Simple handling is made possible by
the magnetically dampened pendulum system – the device levels itself automatically in seconds.
Its height-adjustable bracket makes the SCL 3 truly versatile – on the tripod, on the wall and on
magnetic-responsive objects. The slope-mode feature is an extra that permits gradients to be laid
out. An integrated transport restraint protects the pendulum system against damage. Precision
5 mm / 10 m.
Includes: Tripod/wall bracket, soft case and batteries (4 x type AA).

General safety instructions

Caution: Do not look directly into the beam. Lasers must be kept out of reach of children. Never
Laser radiation!
Do not stare into the
beam or observe it directly
with optical instruments.
Laser class 2 M
EN 60825-1:2007-10
and after extended periods of storage. We also wish to point out that absolute calibration is only
possible in a specialist workshop. Calibration by yourself is only approximate and the accuracy of the
calibration will depend on the care with which you proceed.
Note:
This is a precision instrument product which must be handled with care. Avoid impacts and jarring.
Always turn off all lasers and latch the pendulum in place before transporting, ON/OFF switch in
its "OFF" position! Clean with a soft cloth and glass cleaner.
Warranty:
The warranty period is 2 years from the date of purchase. The warranty covers all material or manu-
facturing defects occurring during this time. The following are excluded from warranty: Damage due
to improper use (e.g. operation with wrong type of current/voltage, connection to unsuitable power
source, fall onto hard surface, etc.) or improper storage, normal wear and tear, and defects which
only insignificantly impair the value or suitability for use. Any tampering by unauthorised persons will
render this warranty void. In the event that you need to claim warranty, please take the complete
device together with all information and the invoice to one of our dealers or send it in to Umarex-
Laserliner.
intentionally aim the device at people. This is a quality laser measuring
device and is 100% factory adjusted within the stated tolerance. For
reasons of product liability, we must also draw your attention to the
following: Regularly check the calibration before use, after transport
ENGLISH
SuperCross-Laser SCL 3
7

Publicité

Table des Matières
loading

Table des Matières