Atag WU90 PMM Série Notice D'utilisation page 48

USE
EN 6
Switching off the fan
Press button - until the display indicates 0.
After 1 minute the display will switch itself off automatically.
Automatic continued operation
Choose the fan setting desired and press button.
The extractor hood remains at the selected setting for 20 minutes, after
which the extractor hood is automatically switched off. The selected
setting will flash on the display.
You can change the setting during automatic continued operation.
Press button - until the display indicates 0 to switch off automatic
continued operation at an earlier stage.
Battery replacement
Remove the cap of the remote control and replace the battery
(type "12VDC 23A"). The battery is chemical waste and should be
transported in a responsible way in accordance with government
regulations.
Caution! Do not change the dip switch settings while replacing the
battery.
ON ECE
1 2 3 4 5 6 7 8 9 10
12VDC 23A