Discharge; Building-In Dimensions - Atag WU90 PMM Série Notice D'utilisation

INSTALLATION

Discharge

Building-in dimensions

The extractor hood WU11..PMM/WU90..PMM has 5 extraction settings:
up, left or right. The extractor is as standard used in the up position.
Alternatively, you can also turn the motor to direct the exhaust either
left or right:
• Unscrew the 4 screw fasteners of the motor and remove the motor.
• Unscrew the 4 screws from the grill (left or right).
• Place the grill over the top hole and attach it using the 4 screws.
• Place the motor tilted in the side hole and secure it using the
4 screws.
The WU11..PMX/WU15..PMX has 3 extraction settings. 2 connecting
pieces are supplied for this.
• 180 mm round piece for extraction upwards.
• 220 x 90 mm plate for extraction left or right.
If the exhaust is directed to the right or left of the unit, the cover plate
(packed with the unit as a separate item) can be used for sealing the
top exit. The profile (also packed separately) can be bent to meet the
connecting flange for the side exit.
WU90..PMM
388
602
235
45
500
520
WU11..PMX
320
935
125
45
460
480
WU11..PMM
235
820
45
840
460
480
WU15..PMX
125
1100 45
1120
700
720
320
935
1100
1120
398
1156
1500
1520
EN 11