Trebs 99334 Mode D'emploi page 13

Install the skirt
Hold the unit and align the unlocking symbol and the arrow, rotate the skirt in
clockwise direction until you can see the arrow and locking symbol are
in the same horizontal position.
Uninstall the skirt
Hold the unit and rotate the skirt in anticlockwise direction to take off the skirt.
Maintenance (skirt/pump)
Turn the pump cap out of the lock position then pull off.
The skirt and pump cap can be placed into the dishwasher.
Maintenance (cleaning)
CLEANING THE CIRCULATOR
For cleaning the heating coil, pump shaft, and sensors,
use dish soap, a soft tooth brush and rinse under water.
Do not rinse the top part of the circulator including the
main body into the water.
CLEANING THE SKIRT
To clean the stainless steel skirt and pump cover; place into a dishwasher or wash it into the sink with
detergent.
13