Device menu
Maintenance
Note
This menu is used for device maintenance, and
should only be operated by experienced users.
Menu
Setting
Upgrade
Carries out a firmware upgrade
A search of recordings or in-
Log Search
formation (S.M.A.R.T. HDD
status) can be made in the log
file according to certain criteria
(exceptions, operation or infor-
mation).
Default
System reset
Menu
Setting
Configuration
Used to export or import the
settings
Information
Device information (serial
number, firmware status etc.)
98
Upgrading the device
Note
A device upgrade can be made from a USB de-
vice or over the network via FTP.
•
Copy the upgrade file (*.mav format) to the
main directory of a USB stick.
Pag
•
Connect the USB stick to a USB port on the
e
device.
1.
Select the USB port (click on "Refresh", if neces-
42
sary).
2.
Select the upgrade file and click on "Upgrade".
3.
Wait until the device reboots.
4.
Check the firmware status in the "Maintenance"
menu under "Information".
43
Note
•
Upgrades via FTP are made in the same way
as detailed above. The PC must be located in
Page
the same local network.
43
•
Set up a PC as an FTP server.
•
Enter the IP address of the FTP server.
43