Device menu
Device menu
Menu overview
The following overview shows all menus used to set and
control the device.
Menu description
Menu
Manual Record
Video Search
Video Export
HDD
Settings
Maintenance
ShutDown
86
Description
Starts or finishes manual recording on selected cameras.
Parameter-based search for recordings started by events (e.g. motion de-
tection).
Function for exporting saved recordings to USB media.
Used for initialising or managing installed HDDs (assigning read/write func-
tions, cameras, network HDD management etc.).
Used for managing all device settings (General, Camera, Record, Network,
PTZ, RS232, Display, Exception, User, UVV).
Device maintenance (new firmware update, log search, import/export con-
figuration, reset to factory defaults etc.).
Used to lock, shut down and reboot the device.
•
When the mouse cursor is pointed at a menu, it is
marked and a short description of the menu is shown
at the bottom.
•
Click on the menu to open it.
•
Click "Exit" to close the menu overview.
See
page...
30
30
32
33
35
41
43