Ptz Control; General Information; Using The Ptz Control Panel; Pop-Up Menu For Mouse Operation - Abus TVVR30003 Manuel Utilisateur

PTZ control

General information

PTZ control is used to access individual PTZ cameras
and control them manually.
Note
When using ABUS PTZ-Cameras there is the op-
tion to configure tours directly in the camera. The
advantage is that other control devices, e.g. key-
board, can call the tours as well.
•
In order to open the menu of ABUS PTZ-
Cameras enter Preset 95. By using the naviga-
tion buttons you can move within the menu.

Using the PTZ control panel

1 2 3 4
No. Meaning / function
1 Selects and displays the PTZ camera
2 Call presets
3 Call tours
4 Keypad
5 Speed
6 Zoom, focus and iris adjustment
7 Exits the PTZ control

Pop-up menu for mouse operation

The following settings can be made. The arrow pointing
to the right indicates that a sub-menu is opened for selec-
tion:
6
7
5
Camera
Call Preset
Call Patrol
Call Pattern
Preset Settings
Patrol Settings
Pattern Settings
PTZ Menu
PTZ
Settings
Exit
Note
Press the right mouse button when the cursor is
positioned on a live image.
PTZ camera selection
Selects the set preset
Selects the specific patrol
Selects the defined pattern
See page 26
See page 27
See page 27
Opens the PTZ menu
Displays the hardware parameters
of the connected camera
Exits the PTZ control
PTZ control
82