AKO PROPlus 3PH BASIC Guide Rapide page 17

4.- Description
Stand-by active mode
Change of the Set Point active
(see pages 23 and 26)
Continuous cycle active
Cold room light active
Alarm active
Display
Browser
Escape key
Help key
Safety cover
Electrical
protections
* If pump down is active, it indicates the operation of the compressor.
** If pump down is active, it indicates that the solenoid is open, otherwise it indicates that the compressor is in operation.
4.1.- Quick access to functions
Pressing it for 5 seconds activates or
SET
deactivates the defrost.
If probe 1 is displayed by default, the value
SET
of probe 2 will be displayed by pressing and
vice versa. (see parameter P8)
Pressing it for 5 seconds, the quick setup
SET
menu is accessed.
Silences the alarms (they are indicated on the
ESC
display).
Pressing it for 5 seconds activates or
deactivates the Stand-By mode. The display
shows the m symbol in this mode.
Temperatura
Defrosting in progress
Fans active
Compressor active*
Compressor or solenoid active**
Pressing it for 5 seconds allows changing the
SET
SET POINT temperature.
Pressing it for 5 seconds, activates or deacti-
SET
vates the CONTINUOUS CYCLE.
Pressing it for 10 seconds, the advanced setup
SET
menu is accessed.
Pressing it for 2 seconds, activates or deacti-
?
vates the cold room light (if P63=1). This
function stays active although the unit is in the
m mode.
17
1569H051 Ed.01
Electronic
expansion valve
controller