Sliding Desktop - Steelcase Ology Manuel D'utilisation

_______________________________________________________________
 Press the MEM2 and
 The Bluetooth symbol
 Once a connection is es-
Error codes
Error codes are always shown on the display with an
"E" for error followed by a number, e.g. "E16". The
most common error codes are also provided with an
extra function such as "E01" "INITIALISE". The
display alternates between a numeric code and a text
message.
The error code remains visible as long as you keep
the toggle switch pressed.
The most important error codes:
E53-E64 COLLISION
E41-E52 OVERLOAD
E01 INITIALISATION
The complete list of error codes can be found in
chapter 6.

5.2.7 Sliding desktop

The Ology desk is supplied with a sliding top (except
for the 600 depth). The sliding top allows you to
reach the cable duct even if the rear of the desk is
not accessible.
Ensure that the connecting cables of
devices on the desk are long enough.
18
REM buttons simultane-
ously for about 2
seconds.
now flashes in the dis-
play, followed by the ID
number of the control
unit.
tablished, the display
shows a larger Bluetooth
symbol and
"CONNECTED".
Operating and adjusting
Danger of crushing!
During the sliding process, hands and
fingers can be crushed between the
sliding desktop and guide rails:
Keep your hands and fingers away from

the guide rails!
Danger of injury!
If the extended sliding desktop is
under load, the desk may tip!
 Do not load the extended top.
ATTENTION
There is a risk of damaging the desk
and objects.
Keep the slide path clear.

Figure 5-5: Sliding desktop opened
1 Cable duct
2 Guides
Desktop locking mechanism, operation by
3
authorised technicians (standard)
Handle of the desktop locking mechanism,
4
operation by the user (optional)
Open the sliding top
 Open the desktop locking mechanisms on both
sides.
 Pull the desktop out to the stop.
120917