When Connecting A Rear View Camera - Pioneer AVIC-HD1BT Manuel D'installation

Connecting the System

When connecting a rear view camera

When using this navigation system with a rear view camera, automatic switching to video
from a rear view camera is possible when the gearstick is moved to REVERSE (R) position.
Rear view mode also allows you to check what is behind you while driving.
USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE REAR VIEW CAMERA. OTHER USE
MAY RESULT IN INJURY OR DAMAGE.
• The screen image may appear reversed.
• The rear view camera function is to use this navigation system as an aid to keep an eye on trailers,
or backing into a tight parking spot. Do not use this function for entertainment purposes.
• The object in rear view may appear closer or more distant than in reality.
• Please note that the edges of the rear view camera images may differ slightly according to whether
full screen images are displayed when backing, and whether the images are used for checking the
rear when the vehicle is moving forward.
Violet/white
5 m
Extension lead (for reverse signal)
Fuse resistor
About connection method
See Page 11.
Be sure to use only the supplied extension lead.
Use of another lead could cause fire, smoke
and/or damage this navigation system.
15
RCA connector 2
Power cord
The navigation unit
15 cm
Brown
(REAR VIEW CAMERA IN)
Note:
It is necessary to set to "Camera
Input" in "System Settings" when
connecting the rear view camera. (For
details, see the Operation Manual.)
RCA cable
(sold separately)
To video output
Note:
Connect to the rear view camera. Do not connect
to any other equipment.
Rear view
camera