Sony STR-DA2800ES Mode D'emploi page 95

x Front B
x No Assign
Note
If the speaker pattern is set so that there are surround
back speakers or front high speakers, you cannot set
the SURROUND BACK/FRONT HIGH/FRONT B/
ZONE 2 terminals for a bi-amplifier connection or a
zone 2 connection.
Center Speaker Lift Up
By using the front high speakers, you can lift
up the sounds of the center speaker to an
appropriate height on the screen, allowing you
to enjoy natural representation without
discomfort.
x 1~10
x Off
Note
• This function does not work in the following cases.
– Headphones are connected.
– There is no center speaker.
– There are no front high speakers.
– The 2CH mode sound field is being used.
– The sound filed for music is being used.
– The "Multi Stereo" sound filed is being used.
Speaker Setup
Lets you adjust each speaker manually on the
Manual Setup screen. You can also adjust the
speaker levels after "Auto Calibration" is
completed.
Select "Level/Distance/Size," then
press .
To adjust the speaker level
You can adjust each speaker's level (center,
surround left/right, surround back left/right,
front high left/right, subwoofer).
1
Select the speaker on the screen for
which you want to adjust the level, then
press .
2
Select "Level," then press
You can adjust the level from –20 dB to
+10 dB in 0.5 dB intervals.
You can adjust the front left level from
FL–10.0 dB to FL+10.0 dB in 0.5 dB
intervals. You can also adjust the front right
level from FR–10.0 dB to FR+10.0 dB in
0.5 dB intervals.
To adjust the distance from the
seating position to each
speaker
You can adjust the distance from the seating
position to each speaker (front left/right,
center, surround left/right, surround back left/
right, front high left/right, subwoofer).
1
Select the speaker on the screen for
which you want to adjust the distance,
then press .
2
Select a "Distance," then press
You can adjust the distance from 1.0 meter
to 10.0 meters (3 feet 3 inches to 32 feet
9 inches) in 1 cm (1 inch) intervals.
To adjust the size of each
speaker
You can adjust each speaker's (front left/right,
center, surround left/right, surround back left/
right, front high left/right) size.
1
Select the speaker on the screen for
which you want to adjust the size, then
press .
2
Select a "Size," then press
• Large
If you connect large speakers that will
effectively reproduce bass frequencies,
select "Large." Normally, select "Large."
• Small
If the sound is distorted, or you feel a lack
of surround effects when using multi-
channel surround sound, select "Small" to
activate the bass redirection circuitry and
output the bass frequencies of each
channel from the subwoofer or other
"Large" speakers.
.
.
.
continued
95 US