Switching The Monitors That Output The Hdmi Video Signals; Outputting The Hdmi Signals Even When The Receiver Is In Standby Mode (Pass Through) - Sony STR-DA2800ES Mode D'emploi

Masquer les pouces Voir aussi pour STR-DA2800ES:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Switching the monitors
that output the HDMI
video signals
When you have two monitors connected to the
HDMI OUT A and HDMI OUT B jacks, you
can switch the output for these two monitors
using the HDMI OUTPUT button on the
remote control.
HDMI
OUTPUT
1
Turn on the receiver and the
two monitors.
2
Press HDMI OUTPUT.
Each time you press the button, the output
will be switched as follows:
HDMI A t HDMI B t OFF t
HDMI A...
You can also use the HDMI OUT button
on the receiver.
Outputting the HDMI
signals even when the
receiver is in standby
mode
(Pass Through)
You can output the video and audio signals
from the HDMI IN jack to the TV connected to
the HDMI OUT A jack even when the receiver
is in standby mode.
If you use this function while "Control for
HDMI" is set to "On," the input of the receiver
is switched in accordance with the operation of
the connected equipment, even when the
receiver is in standby mode.
When you activate this function, make the
settings for "Pass Through" following the
steps below.
1
Select "Settings" from the
home menu, then press
2
Select "HDMI Settings," then
press
.
3
Select "Pass Through," then
press
.
4
Select the parameter you want,
then press
.
.
continued
81
US

Publicité

Chapitres

Table des Matières
loading

Table des Matières