Product Description - SOMFY V300 Notice D'installation

V300
The indoor monitor is fitted with an RTS (Radio Technology Somfy) radio transmitter. This wireless control function enables home
products with a Somfy RTS receiver to be controlled (garage door, gate, lighting, roller shutters, awning, etc.).
10
5
Mark Description
1 Screen
Microphone activation
2
button
Electric latch/lock
3
button
4 Gate button
5 Open/on button
6 STOP button
7 Close/off button
RTS channel selection
8
button
9 Channel indicator lights
10 Photo LED
11 Microphone
12 Bell volume
13 Loud speaker volume
14 PROG button
15 MENU button
16 Settings buttons
17 BACK button
Switch for 1 or 2
18
residences
19 Terminal block
20 Speaker
Copyright © 2018 SOMFY ACTIVITES SA. All rights reserved.

3 - PRODUCT DESCRIPTION

225
4
3
1
6 7 8
9 11
Used to view the visitor.
Activates the microphone on the monitor to speak to a visitor.
Controls the electric latch or lock.
Controls the motorised gate.
Opens the gate, roller shutter, awning or garage door or switches lighting on.
Stops the movement of the gate, roller shutter, awning or garage door.
Closes the gate, roller shutter, awning or garage door or switches lighting off.
Enables the radio channel controlling a product or a group of products to be selected
(see "9.3 Wireless control of a Somfy RTS device via the monitor" ).
Each indicator light represents one RTS (radio technology Somfy) channel. There are 5
channels in total: for the 5th channel, the 4 indicator lights are lit.
The photo LED is lit in the event of a missed visit: a photo is recorded via the monitor for
each unanswered call.
Enables you to talk to your guest in front of the door station.
Bell volume setting dial.
Speaker volume setting dial.
Enables the monitor to be programmed for wireless control of RTS (radio technology
Somfy) equipment.
Activates the menu to adjust the brightness, contrast, etc.
Enable you to navigate through the menu when choosing your bell-tone (see the
instructions for the V300 kit, section "6.1.1 Changing the monitor bell-tone") and when
adjusting the monitor (contrast, brightness, etc.)
Enables you to go back to a previous screen in the settings menu.
Enables a screen shot to be taken during a conversation with a visitor.
Enables the monitor bell-tone to be selected by keeping the button depressed.
Enables the installation to be set for one or two residences.
Enables the monitor to be connected to the power supply, the door station and the
additional monitor if it is installed.
Allows the bell to be heard when activated as well as the voice of the visitor standing in
front of the door station.
22
12
13
2
14
Description
19
20
18
EN EN
15
17
16
3