Cleaning And Drying; Safety Directions; General; Intended Use - Futech Nexus Manuel Utilisateur

FUTECH-Nexus4langues_Doc_A 510 S 29/06/11 18:31 Page87

Cleaning and Drying

Product and Accessories
• Blow dust off optical parts.
EN
• Never touch the glass with your fingers.
• Use only a clean, soft, lint-free cloth for cleaning. If necessary, moisten
the cloth with water or pure alcohol.
• Do not use other liquids; these may attack the polymer components.
Damp Products
• Dry the product, the transport container, the foam inserts and the
accessories at a temperature not greater than 40°C / 104°F and clean
them.
• Do not repack until everything is completely dry.
Damp Products
• Dry the product, the transport container, the foam inserts and the
accessories at a temperature not greater than 40°C / 104°F and clean
them.
• Do not repack until everything is completely dry.

Safety Directions

General

Description
The following directions should enable the person responsible for the
product, and the person who actually uses the equipment, to anticipate
and avoid operational hazards.
The person responsible for the product must ensure that all users
understand these directions and adhere to them.

Intended Use

Permitted Use
• The instrument casts a horizontal laser plane for the purposes of
alignment.
• The unit can be set up on its own base plate, wall- mount or on a
tripod.
• The laser beam can be detected by means of a laser detector.
• This product is intended for indoor use and applications.
87